GSOL is intended for use during repeated root canal treatments to remove gutta-percha cones from the root canal.
Features:
It is an orange oil (D-limonene) based Gutta Percha Solvent used for removing gutta percha at the time of Re-root canal treatment
Heat Cure acrylic denture base material. Simple mixing, easy to process. Cross linking ensures superior quality.
Features:
Heat Cure acrylic denture base material.
Simple mixing, easy to process.
Cross linking ensures superior quality.
Superior quality
HF GEL is a porcelain etchant containing 9.6% buffered hydrofluoric acid in gel form that must be handled with extreme care (see warnings). HF GEL has been buffered, gelled and packaged to minimize problems, provided that it is used in accordance with these instructions. Porcelain etchant improves the mechanical bond between porcelain and adhesive/cement by increasing the surface area of the porcelain. The effect is similar to sandblasting but is more controlled and effective.
Features:
Red Color Thermoplastic impression material in the form of round plates cakes to take primary impression in edentulous cases.
Features:
It softens at 60°C.
It is excellent for taking primary impression of edentulous teeth and becomes stable after cooling and are shrinkage free.
It can be used with matrix band for single tooth impressions.
Inlay/Onlay wax are type-1 waxes which soften at a temperature that is not hazardous to the dental pulp tissue, hence can be used to prepare patterns of indirect-restorations in the patient’s mouth by direct-wax technique. They have uniform workability over a wide temperature range and facilitate accurate adaptation to the prepared cavity.
Features:
It comes in stick form.
It is used in institutes by students for easy application.
Causes profound hemostasis - Controls bleeding by contracting the tissues to seal the injured blood vessels. Thereby arresting the bleeding within few seconds of application & reducing the chair side time for moisture control
• Controls moisture from the crevicular seepage by absorption of the crevicular fluid and momentary shrinking the epithelial tissue. Eliminating sulcular fluid contamination during restorative treatment allowing for optimal bonding of the adhesives & liners.
• Physically displaces the tissues for superb marginal access with minimal pressure and no danger of rupturing epithelial attachment, providing unsurpassed kindness to hard and soft tissues.
• Requires much less time and force than using a gingival retraction cord.
• Decreases the need of repeat impressions by aiding in precise recording of the finish lines and margins.
Features:
Stop Bleeding in Seconds
Excellent handling
Decreases costly impression remakes
Causes profound hemostasis
Stops bleeding in seconds , saving chair time
Provides unsurpassed kindness to hard and soft tissues
Eliminates sulcular fluid contamination for optimal bonding
Unique Binding & Coating Agents.
Maarc MTA is a powder & liquid system consisting of tricalcium and dicalcium silicate. Maarc MTA is white in color and does not stain the tooth. The powder is fine-grained which makes it ideal to be used as a sealer / in putty consistency as desired. The pH of the mix is higher than 10.5 which makes it the best material for root repair.
Features:
Excellent Handling Properties
Fine Grain
Fast Setting
Pure Mineral Tech : No Discoloration
Bactericidal effect due to High pH
Biocompatible
Promotes mineralization of tissue
High Strength make is suitable as base restoration material
Good radiopacity
Each Packet of ‘MAARC’ Mockup Wax contains 12 sheets wrapped in non-adhesive Silicone Paper to facilitate easy removal.
Features:
It simulates the final outcome. The result is temporary and can be changed according to the patient’s desire.
It can be repeated as many times as needed in order to select the best possible solution.
It helps create trust between the patient and the dentist.
It allows the dentist to evaluate the patient’s desires and change the treatment plan accordingly.
Baseplate wax is a durable substance used mainly to fabricate occlusion rims for dental construction into which denture teeth are arranged (IE. holding artificial teeth to baseplates) before laboratory processing and during fabrication of the denture.
Features:
It is a type 2 low-fusing wax used for indirect wax technique. It is made of low-molecular weight ester of fatty acids derived from natural or synthetic components, such as petroleum derivatives, that soften at a relatively low temperature (45-55°C).
The wax does not fragment into flakes when molded after softening, and provides a framework for registering of jaw relations and arrangement of the prosthetic teeth
The wax attains a plastic state at room temperature, hence during the trials the teeth do not get displaced from their defined layout as per the patient’s Jaw model under the Ideal working pressure of try in models.
The wax melts out during the process of burnout/ dewaxing to create the mold space into which the acrylic is filled for making the final denture prosthesis
Plaque Disclosing Gel is made of special dye which stains plaque, As a result, one gets clear idea of brushing irregularities. Dentist can easily make patients understand in which area they have to focus more and which technique of brushing to the best way to educate patients about their brushing technique and teach them proper brushing. Dentist can give one syringe to patient to try the same at their home.
Features:
special dye which stains plaque, clear idea of brushing irregularities.
